LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear -- F150) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Torque Specifications

Description Nm Lb-Ft Lb-In
Differential bearing cap bolt 105 77 ---
Differential pinion shaft lock bolt 30 22 ---
Oil filler plug 30 22 ---
Differential housing cover bolts 45 33 ---
Driveshaft bolts 112 83 ---
Rear spring plate nuts(1) 115 85 ---
Rear spring plate nuts(2) 115 85 ---
Ring gear bolts 105 77 ---
Shock absorber bolts 70 52 ---
Traction-Lok Clutch Gauge nut 6.7 --- 60
Pinion bearing preload (used pinion bearings) 0.9--1.5 --- 8--14
Pinion bearing preload (new pinion bearings) 1.8--3.3 --- 16--29
Driver Handle 2.2 --- 20
Initial minimum breakaway torque (Traction-Lok®) 27 20 ---
Brake hose junction block 18 24 ---
(1) For vehicles equipped with load-leveling suspension.

(2) For vehicles not equipped with load-leveling suspension.
scientia non olet · About LEMON Manuals