LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear -- F150) >> In-Vehicle Repair >> Rear Wheel Bearing and Axle Shaft Oil Seal >> Removal

Rear Wheel Bearing and Axle Shaft Oil Seal: Removal

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the axle shaft. Refer to AXLE SHAFT .
    2. NOTE: If the wheel bearing oil seal is leaking, the rear axle housing vent may be plugged.
    Fig 1: Removing Rear Axle Bearing And Wheel Bearing Oil Seal
    G02192452Courtesy of FORD MOTOR CO.
  2. Using the special tools, remove the rear axle bearing and wheel bearing oil seal.
scientia non olet · About LEMON Manuals