Power Brake Booster: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1999 Mercury Tracer, 1999 Mercury Mystique, 1999 Ford Escort, 1999 Ford Contour, and 1998 Mercury Tracer. However, it is still accessible from the selected car via links, so may be relevant.
Install new gasket on booster studs. Install brake booster. Lubricate and install clevis pin. To complete installation, reverse removal procedure. Bleed brakes. See BLEEDING BRAKE SYSTEM . Check brake pedal height. See BRAKE PEDAL HEIGHT under ADJUSTMENTS.