LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Disc Brakes & Drum Brakes) >> Adjustments >> Rear Brake Shoes

Rear Brake Shoes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1999 Mercury Tracer, 1999 Mercury Mystique, 1999 Ford Escort, 1999 Ford Contour, and 1998 Mercury Tracer. However, it is still accessible from the selected car via links, so may be relevant.
  1. This adjustment should be made only after replacing brake lining or if brake applications are insufficient to actuate automatic adjuster. Raise and support vehicle. Remove wheels.
  2. Remove brake drum. Use a brake drum diameter gauge to determine brake drum diameter and proper shoe diameter. Hold automatic adjusting lever out of engagement. Using a screwdriver, rotate knurled quadrant on adjuster assembly to adjust brake shoes.
  3. Adjust brake shoes to fit gauge. Rotate gauge around shoe to ensure proper fit. Install brake drum. Install wheels. Check brake operation by making several stops at varying forward speeds.