LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (Front Drive Axle/Differential - Ford 8.8-Inch -- F150) >> In-Vehicle Repair >> Drive Pinion Seal >> Removal

Drive Pinion Seal: Removal

WARNING: This page is about a different car, the 2002 Ford Pickup, 2001 Ford Pickup, and 2000 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front axle universal joint flange. Refer to UNIVERSAL JOINT FLANGE-Front .
    2. CAUTION: Do not damage the front axle housing.
    Fig 1: Removing Pinion Seal
    G02187069Courtesy of FORD MOTOR CO.
  2. Remove the pinion seal.
scientia non olet · About LEMON Manuals