LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (Front Drive Axle/Differential - Ford 8.8-Inch -- F150) >> In-Vehicle Repair >> Drive Pinion Seal >> Installation

Drive Pinion Seal: Installation

WARNING: This page is about a different car, the 2002 Ford Pickup, 2001 Ford Pickup, and 2000 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the pinion seal bore, and use the Pinion Seal Replacer to install the pinion seal.
    Fig 1: Installing Pinion Seal
    G02187070Courtesy of FORD MOTOR CO.
  2. Install the front axle universal joint flange. Refer to UNIVERSAL JOINT FLANGE-Front .
scientia non olet · About LEMON Manuals