Special Tool(s)
WARNING: This page is about a different car, the 2003 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle on a hoist.
- Remove the differential fill plug.
- Use the oil suction gun and remove the axle lubricant through the fill opening.
- If necessary, a cleaning solvent can be injected to remove any contaminants.
- Repeat Step 3 to remove the cleaning solvent.
- Refill the differential with Motorcraft SAE 80W90 Thermally Stable 4x4 Axle Lubricant meeting Ford specification WSP-M2C197-A.
- Install the fill plug and tighten.