LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2814 (Automatic Transaxle - 6F35 - Specifications, Description And Operation) >> Description And Operation >> Transaxle Operation >> Reverse Position >> Planetary Gearset Operation

Planetary Gearset Operation

WARNING: This page is about a different car, the 2011 Mercury Milan and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Front planetary gearset driven components:

Front planetary gearset held components:

Center planetary gearset held components:

Rear planetary gearset held components:

REVERSE POSITION CLUTCH APPLICATION CHART

Gear/Manual Lever Position Direct (3, 5, R) Overdrive (4, 5, 6) Forward (1, 2, 3, 4) Low/ Reverse (L, R) Intermediate (2, 6) One-Way
REVERSE X     X    

For component information, refer to MECHANICAL COMPONENTS AND FUNCTIONS  in this service information.