LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2814 (Automatic Transaxle - 6F35 - Specifications, Description And Operation) >> Description And Operation >> Transaxle Electronic Control System >> Output Shaft Speed (OSS) Sensor

Output Shaft Speed (OSS) Sensor

WARNING: This page is about a different car, the 2011 Mercury Milan and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The Output Shaft Speed (OSS) sensor is a Hall-effect pickup, located on the transfer shaft drive gear, that sends a signal to the PCM to indicate transmission output speed. The OSS is used for TCC control and shift scheduling.

scientia non olet · About LEMON Manuals