LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Driveline System - General Information) >> Diagnosis And Testing >> Driveline System >> Universal Joint (U-Joint) Inspection

Universal Joint (U-Joint) Inspection

WARNING: This page is about a different car, the 2003 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Place the vehicle on a frame hoist and rotate the driveshaft (4602) by hand. Check for rough operation or seized U-joints. Install a new U-joint if it shows signs of seizure, excessive wear, or incorrect seating. For additional information, refer to DRIVESHAFT article

scientia non olet · About LEMON Manuals