LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Driveline System - General Information) >> Diagnosis And Testing >> Driveline System >> Coupling Shaft Center Bearing Alignment

Coupling Shaft Center Bearing Alignment

WARNING: This page is about a different car, the 2003 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Vehicle noise and vibration can be caused by dislocated/failed driveshaft center bearing support rubber insulator, contaminated driveshaft center bearing support (4800) or excessive compression of the rubber insulator. For additional information, refer to DRIVESHAFT article.

scientia non olet · About LEMON Manuals