LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2789 (Engine Controls - Powertrain DTC Charts & Descriptions - DTC P0218 Through DTC P0581 - (Except Diesel & Hybrid)) >> DTC P0572: Brake Switch A Circuit Low

DTC P0572: Brake Switch A Circuit Low

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P0572 - BRAKE SWITCH A CIRCUIT LOW

Description:  This DTC indicates the brake switch is stuck in the ON position.
Possible Causes: 
  • Open or short in the brake pedal position (BPP) circuit
  • Open or short in the stoplamp circuits
  • Damaged brake switch
  • Incorrectly adjusted brake switch
Diagnostic Aids:  Using the scan tool, check the BPP/BOO PID. The BPP/BOO PID should toggle on and off with brake pedal activation.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST FD .
scientia non olet · About LEMON Manuals