DTC P052A: Cold Start Intake (A) Camshaft Position Timing Over-Advanced (Bank 1)
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P052A - COLD START INTAKE (A) CAMSHAFT POSITION TIMING OVER-ADVANCED (BANK 1)
| Description: | The powertrain control module (PCM) monitors the variable camshaft timing (VCT) position for an over-advanced camshaft timing during cold start up. The test fails when the camshaft timing exceeds a maximum calibrated value or remains in an advanced position. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC is a functional check of the VCT unit. Diagnose any base engine concerns related to the engine oil pressure or engine timing. Refer to the appropriate Engine System article, Oil Pressure Test , to check the engine oil pressure. Refer to the appropriate Engine article, Timing Drive Components , to check the engine timing. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HK . | ||