DTC P0345: Camshaft Position Sensor A Circuit (Bank 2)
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P0345 - CAMSHAFT POSITION SENSOR A CIRCUIT (BANK 2)
| Description: | This DTC sets when the powertrain control module (PCM) can no longer detect the signal from the camshaft position (CMP) sensor on bank 2 (vehicles with a single CMP sensor per bank) or bank 2, sensor 1 (vehicles with dual CMP sensors per bank). | ||
| Possible Causes: | See the possible causes for DTC P0340 . | ||
| Diagnostic Aids: | See the diagnostic aids for DTC P0340 . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DR . | ||