LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2762 (Engine Controls - Pinpoint Test Hg: Positive Crankcase Ventilation (PCV) System Through Pinpoint Test JD: Crankshaft Position (CKP) Sensor - (Except Diesel & Hybrid)) >> Pinpoint Test HX: Evaporative Emission (EVAP) Monitor and System >> Notes

Pinpoint Test HX: Evaporative Emission (EVAP) Monitor and System: Notes

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Proceed to DTC testing steps listed in FAULT CODE SETTING CONDITION  table of fault code setting condition.
FAULT CODE SETTING CONDITION

Fault Code Setting Condition Testing
P0442 Continuous Memory  HX52
P0443 KOEO, KOER, Continuous Memory  HX1
P0446, P1451 KOEO, KOER, Continuous Memory  HX31
P0451 KOEO, KOER, Continuous Memory  HX46
P0452 KOEO, KOER, Continuous Memory  HX19
P0453 KOEO, KOER, Continuous Memory  HX24
P0455, P0457 Continuous Memory  HX47
P0456 Continuous Memory  HX52
P0461, P0463 KOEO, KOER, Continuous Memory  HX37