LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 276 (Steering System - General Information) >> Diagnosis And Testing >> Steering System >> Component Tests >> Steering Linkage

Steering Linkage

WARNING: This page is about a different car, the 2003 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Excessive vertical  motion of the studs relative to the sockets may indicate excessive wear.
  1. With the parking brake applied, perform the following:
    • Have an assistant rotate the steering wheel back and forth 360 degrees and watch for relative motion of the studs in the steering linkage ball sockets.
    • Watch for loose steering gear mounting.
  2. Another method is to raise the front wheels (1007) off the ground, grasp the wheel at the front and rear and watch for excessive play or binding in the joints while trying to steer the wheels.
  3. Replace or tighten any worn, damaged, or loose steering components.
scientia non olet · About LEMON Manuals