Pinpoint Test FD: Brake Pedal Inputs: Introduction: Notes
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Milan, and 2006 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
This pinpoint test is intended to diagnose the following:
- brake pedal position (BPP) (13480)
- brake pedal switch (BPS) (9C924), (9C872)
- harness circuits: B+, BPP, BPS
- powertrain control module (PCM) (12A650)
Refer to the appropriate SYSTEM WIRING DIAGRAMS for specific vehicle application and pin locations.