Current Flow (1)
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Each cell normally starts with the component that powers the circuit, such as a fuse or the ignition switch. Current flow is shown from the power source at the top of the diagram to ground at the bottom of the diagram. A full representation of the power supply of a fuse or the power distribution from a fuse to various components is given in appropriate OEM WIRING DIAGRAMS - POWER DISTRIBUTION article . Full representation of the ground connections are shown in appropriate OEM WIRING DIAGRAMS - GROUNDS article .