LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 272 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Occupant Classification Sensor (OCS) >> Installation (Original Equipment Ocs)

Installation (Original Equipment Ocs)

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.

If installing service kit OCS, go to INSTALLATION (SERVICE KIT OCS)  . DO NOT activate air bag system at this time. To install, reverse removal procedure. Tighten front seat cushion and seat back-to-seat track bolts to specification. See TORQUE SPECIFICATIONS  . Install front seat in vehicle. Zero OCS sensor. See ZERO OCCUPANT CLASSIFICATION SENSOR (OCS)  under DIAGNOSTICS. Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.

Fig 1: Identifying Right Front Seat Components
G99G29591Courtesy of FORD MOTOR CO.
Fig 2: Identifying Seat Cushion Assembly Components (Original Equipment OCS)
G99A29587Courtesy of FORD MOTOR CO.