LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 272 (Supplemental Inflatable Restraint System) >> Disabling & Activating Air Bag System >> Activating System >> Diagnostics Activating Procedure (With Side Curtain & Side AIR Bags, Seats Installed)

Diagnostics Activating Procedure (With Side Curtain & Side AIR Bags, Seats Installed)

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Wait at least one minute for back-up power supply to deplete stored energy.
  2. Remove air bag simulators from right and left side air bag module connectors and reconnect connectors. Remove air bag simulators from right and left side curtain air bag module connectors, reconnect connectors and reinstall removed components. Tighten seat belt guide bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Remove air bag simulator from passenger-side air bag module connector, reconnect connector and close glove box. Remove air bag simulator from driver-side air bag module, reconnect connector and close access door.
  4. Connect negative battery cable. With all air bag simulators removed, perform system operation check. See SYSTEM OPERATION CHECK  . Perform computer relearn procedure. See COMPUTER RELEARN  . Reprogram pre-set radio frequencies and set clock.
scientia non olet · About LEMON Manuals