Component Test - Video Camera: Fusion/MKZ
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Measure the resistance between the video camera pins, component side, as follows:
TERMINAL RESISTANCE REFERENCE TABLE
| Video Camera Pins | Resistance |
|---|---|
| 3 and 6 | 38-49 ohms |
| 3 and 7 | 39-48 ohms |
| 6 and 7 | 74-101 ohms |
| 4 and 6 | 38-49 ohms |
If the resistance values for the video camera are within the specifications listed, the video camera is functional at this time.
If the resistance values for the video camera are not within the specifications listed, the video camera is inoperative at this time. Install a new video camera. Refer to VIDEO CAMERA in this service information. Test the system for normal operation.