Normal Operation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
During each vehicle start sequence, when the key is turned to the START or ON position, the Passive Anti-Theft System (PATS) transceiver reads the PATS key ID code and sends the data to the Instrument Panel Cluster (IPC). If there is a bad transponder in the Integrated Keyhead Transmitter (IKT) key that is in the ignition lock cylinder, or if there was a concern during the programming of the IKT key, DTC B10D7:05 can set, and the vehicle experiences a PATS no-start.
- DTC B10D7:05 (PATS Key: System Programming Failures) - a continuous DTC that sets when there was a failure during the key programming procedure.
This pinpoint test is intended to diagnose the following:
- PATS key programming concern
- PATS key concern (transponder)