LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Air Bag Restraint Systems) >> Removal & Installation >> Front Crash Sensor >> Removal

Front Crash Sensor: Removal

WARNING: This page is about a different car, the 2004 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Remove screws, disengage retaining clips and remove radiator grille. Disconnect front crash sensor electrical connector. Using appropriate tool, lower front air foil to access front crash sensor bolts. Remove bolts and front crash sensor.