LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Air Bag Restraint Systems) >> Removal & Installation >> Rear Side Crash Sensor >> Removal

Rear Side Crash Sensor: Removal

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. On side of affected rear side crash sensor, use appropriate tool to disengage and remove rear seat mini-buckle. Release rear seat cushion retaining lever and remove rear seat cushion. Remove rear seat bolster mounting nut.
  3. Release rear seat bolster retaining lever and remove rear seat bolster. Disconnect rear side crash sensor electrical connector. See Figure . Remove rear side crash sensor mounting bolts and crash sensor.
scientia non olet · About LEMON Manuals