LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Air Bag Restraint Systems) >> Disabling & Activating Air Bag System >> Activating System >> Diagnostics Activating Procedure (Seats Installed-with Side Curtain AIR Bags)

Diagnostics Activating Procedure (Seats Installed-with Side Curtain AIR Bags)

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove air bag simulators from left and right seat belt pretensioners and reconnect connectors. Reinstall removed trim and components. Remove air bag simulators from left- and right-side air bag electrical connectors and reconnect connectors.
  2. Remove air bag simulators from side curtain air bag harness connectors and reconnect connectors. Reinstall A-pillar trim. Remove air bag simulator from passenger-side air bag module harness connector and reconnect connectors. Reinstall glove box. Remove air bag simulators from clockspring connectors. Install driver-side air bag module.
  3. Connect negative battery cable. With all deployable air bag system devices installed and connected, perform system operation check. See SYSTEM OPERATION CHECK  . Perform computer relearn procedure. See COMPUTER RELEARN  . Reprogram pre-set radio frequencies and set clock.
scientia non olet · About LEMON Manuals