LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2687 (Fuel Charging & Controls - 2.5L (Except Hybrid)) >> Removal And Installation >> Fuel Pump Control Module >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position aside the LR quarter panel luggage compartment trim.
  2. Disconnect the Fuel Pump (FP) control module electrical connector.
  3. Remove the 2 pin-type retainers and the FP control module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals