Pilot Bearing: Removal

WARNING: This page is about a different car, the 2011 Mercury Milan and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Remove the clutch disc and pressure plate. For additional information, refer to CLUTCH DISC AND PRESSURE PLATE in this service information.
Using the Pilot Bearing Remover, remove the pilot bearing.

Fig 1: Removing Pilot Bearing Using Pilot Bearing Remover
Courtesy of FORD MOTOR CO.
Inspect the pilot bearing for:
- misalignment and looseness in the flywheel.
- needle rollers for scoring, worn or broken needle rollers, inadequate grease or discoloration.
- seal leakage.