LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Supplemental Restraint System - Air Bag Restraint Systems) >> Removal & Installation >> Restraints Control Module (RCM) >> Removal

Restraints Control Module (RCM): Removal

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove center console. See Figure . Pinch thumb tab and pivot connector position assurance lever away from RCM, disengaging the lever. See Figure . Push down on retaining tab and disconnect small RCM harness connector. Remove RCM mounting nuts and RCM. See Figure .