LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2679 (Automatic Transaxle External Controls (Hybrid)) >> Removal And Installation >> Selector Lever Knob >> Removal

Selector Lever Knob: Removal

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide the selector lever knob bezel downward to gain access to the 2 selector lever knob screws.
    Fig 1: Sliding Selector Lever Knob Bezel Downward
    G06275790Courtesy of FORD MOTOR CO.
  2. Remove the 2 screws from the selector lever knob. Remove the selector lever knob and the selector lever knob bezel.
Fig 2: Locating Selector Lever Knob Screws
G06275791Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals