Selector Lever Bezel - Fusion/Milan: Installation

Vehicles equipped with a 2.5L or 3.0L (4V) engine 

NOTE: Be sure that the override lever is inserted in the override lever guide or the shift interlock override button will not work correctly.
NOTE: Selector lever removed for clarity.
Fig 1: Locating Locking Tabs
Courtesy of FORD MOTOR CO.
1. Install the selector lever bezel on the selector lever.
   • Position the override lever in the override lever guide.
   • Make sure that the 3 locking tabs are locked in place.

   Vehicles equipped with a 3.5L engine 

NOTE: Selector lever removed for clarity.
Fig 2: Locating Selector Lever Bezel Tabs
Courtesy of FORD MOTOR CO.
2. Install the selector lever bezel on the selector lever and be sure the 3 tabs are locked in place.

   All vehicles 

3. Connect the selector lever bezel electrical connector.
   Fig 3: Locating Selector Lever Bezel Electrical Connector

   Courtesy of FORD MOTOR CO.
NOTE: It is necessary to route the Transmission Control Switch (TCS) harness or select switch harness out of the selector lever bezel when removing the selector lever knob.
NOTE: TCS shown in the illustration, select switch similar.
Fig 4: Locating Selector Lever Knob, Selector Lever And Screws
Courtesy of FORD MOTOR CO.
4. Install the selector lever knob on the selector lever and install the screws.
5. Slide the selector lever knob bezel up and install it on the selector lever knob.
   Fig 5: Sliding Selector Lever Knob Bezel

   Courtesy of FORD MOTOR CO.
6. Connect the TCS or select switch electrical connector.
   Fig 6: Locating Select Switch Electrical Connector

   Courtesy of FORD MOTOR CO.

   All vehicles 

7. Position the utility tray in place and connect the electrical connector.
   Fig 7: Locating Utility Tray Electrical Connector

   Courtesy of FORD MOTOR CO.
8. Install the utility tray on the center console.
   Fig 8: Locating Center Console Utility Tray

   Courtesy of FORD MOTOR CO.
9. Install the center console trim panel.
   Fig 9: Locating Center Console Trim Panel

   Courtesy of FORD MOTOR CO.
10. Install the selector lever trim ring.
    Fig 10: Locating Selector Lever Trim Ring

    Courtesy of FORD MOTOR CO.