LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2677 (Electronic Engine Controls - 3.5L) >> Removal And Installation >> Knock Sensor (KS) >> Material Specifications

Material Specifications

WARNING: This page is about a different car, the 2011 Lincoln MKZ and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS TABLE

Item Specification
Motorcraft® Specialty Green Engine Coolant
VC-10-A2 (US); CVC-10-A (Canada)
WSS-M97B55-A
Fig 1: Identifying Knock Sensor (KS) Replacement Components With Torque Specifications
G06272596Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION

Item Part Number Description
1 9N271 Coolant tube
2 8565 O-ring seal
3 14A464 Knock Sensor (KS) electrical connector
4 W704749 KS bolts (2 required)
5 12A699 KS