LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2675 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Lock Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the cover, remove the screw and position the interior front door handle finish panel aside.
  2. Disconnect the door lock control switch electrical connector.
  3. Release the locking clips and remove the door lock control switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals