LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2675 (Handles, Locks, Latches And Entry Systems) >> Diagnosis And Testing >> Handles, Locks, Latches and Entry Systems >> Pinpoint Tests >> Pinpoint Test AB: DTC B1317 >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The Driver Door Module (DDM) monitors the voltage from the battery to determine if it goes above or below specific thresholds and sets DTC B1317 in continuous memory and on-demand if the DDM detects high battery voltage above 15.5 volts on circuit SBP12.

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals