Seat Latch Adjustment - Rear
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the parcel shelf. For additional information, refer to INTERIOR TRIM & ORNAMENTATION -- FUSION, MILAN & MKZ article.
- Loosen the 2 rear seat backrest latch nuts. Adjust the latch position as necessary for good backrest fit and latch closure when upright.
- Tighten to 48 Nm (35 lb-ft).
- Install the parcel shelf. For additional information, refer to INTERIOR TRIM & ORNAMENTATION -- FUSION, MILAN & MKZ article.