LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2673 (Seat System - Seats) >> Diagnosis And Testing >> Seats >> Pinpoint Tests >> Pinpoint Test C: The Power Seat is Inoperative - MKZ, Passenger >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The passenger seat control switch is supplied voltage and ground. When the passenger seat control switch is activated, voltage and ground is supplied to the applicable seat track motor to move the seat to the desired position. There are 3 seat track motors that combine to move the seat cushion horizontally (forward/rearward) and vertically (front up/down and rear up/down). If a new motor on the seat track needs to be installed, it is necessary to install an entire seat track assembly. There is an additional motor in the seat recliner mechanism to move the seat backrest forward and rearward.

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals