Wire Repair: Notes

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, and 2004 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

To repair damage to sensor wiring and wiring harnesses, note following conditions and go to REPAIR PROCEDURE .

All wire splice connections must be staggered at least 2" (50 mm) apart.
Use proper size, waterproof butt-splice connectors on any exposed wiring.
Use heat shrink nylon splice to prevent water, salt, condensation and heat from affecting the wiring repair.
Use transparent splice connectors to allow inspection of finished splice.