LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Supplemental Inflatable Restraint System - Except F150) >> Removal & Installation >> Seat Belt PRETENSIONERS >> Removal & Installation (With Seat Integrated Restraints)

Removal & Installation (With Seat Integrated Restraints)

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, and 2004 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Remove appropriate front seat. See FRONT SEAT . Disengage seat belt buckle pretensioner and seat usage switch electrical connectors from seat cushion pan. Remove seat belt buckle pretensioner mounting nut and pretensioner.
    NOTE: When tightening seat belt buckle pretensioner nut, ensure seat backrest pivot bolt does not turn with nut.
  2. To install, reverse removal procedure. Tighten seat belt buckle pretensioner nut to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
scientia non olet · About LEMON Manuals