Clearing Fault Codes
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, and 2004 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
Connect scan tool to Data Link Connector (DLC), located under instrument panel to right of steering column. Turn ignition switch to RUN position. Follow manufacturer"s instructions for scan tool being used. Scan tool will retrieve DTCs again after clearing. If any DTCs remain, they will be displayed. Hard DTCs will be redisplayed after clearing DTCs, since they cannot be cleared from restraints control module.