Torque Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS TABLE
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Camshaft Position (CMP) sensor bolt | 10 | - | 89 | ||
| Catalyst Monitor Sensor (CMS)a | - | - | - | ||
| Crankshaft Position (CKP) sensor bolt | 10 | - | 89 | ||
| Cylinder Head Temperature (CHT) sensor | 11 | - | 97 | ||
| Heated Oxygen Sensor (HO2S)(1) | - | - | - | ||
| Knock Sensor (KS) bolt (cylinder-block mounted) | 25 | 18 | - | ||
| Knock Sensor (KS) bolt (cylinder-head mounted) | 25 | 18 | - | ||
| Manifold Absolute Pressure (MAP) sensor bolt | 6 | - | 53 | ||
| Mass Air Flow (MAF) sensor screws | 2 | - | 18 | ||
| PCM bolts | 8 | - | 71 | ||
| Radio frequency interference capacitor | 6 | - | 53 | ||
| Variable Camshaft Timing (VCT) oil control solenoid bolt | 10 | - | 89 | ||
|
|||||