LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 266 (Rear Suspension) >> Removal And Installation >> Wheel Studs >> Removal >> Vehicles with single wheel and full floating axle

Vehicles with single wheel and full floating axle

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel hub. For additional information, refer to DIFFERENTIALS & DRIVE AXLES .
  2. Using the special tool, remove the wheel stud from the wheel hub.
    Fig 1: Removing Wheel Stud From Hub
    G00376990Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals