LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 266 (Rear Suspension) >> Removal And Installation >> Wheel Studs >> Installation >> Vehicles with single wheel and full floating axle

Vehicles with single wheel and full floating axle

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, install the wheel stud.
    Fig 1: Installing Wheel Stud
    G00376997Courtesy of FORD MOTOR CO.
  2. Install the wheel hub. For additional information, refer to DIFFERENTIALS & DRIVE AXLES .