LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2659 (Hydraulic Brake System Actuation) >> Removal And Installation >> Brake Pedal and Bracket - Hybrid >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S)

G07784214
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
Fig 1: Exploded View Of Brake Pedal And Bracket Components With Torque Specifications - Hybrid
G06269642Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION

Item Part Number Description
1 2L523 Brake booster push rod clevis locking pin
2 - Brake pedal angle sensor electrical connector (part of 14290)
3 - Simulator cut off valve solenoid electrical connector (part of 14290)
4 - Simulator fluid pressure sensor electrical connector (part of 14290)
5 W520112 Brake booster nut (4 required)
6 W505263 Brake pedal and bracket upper bolts (2 required)
7 W505263 Brake pedal bracket bolt (2 required)
8 2455 Brake pedal and bracket assembly
9 2468 Brake pedal bracket