LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2654 (Rear Drive Axle/Differential) >> In-Vehicle Repair >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING article.
  2. Remove the 10 bolts and the differential housing cover.
    • Drain the differential fluid from the housing.
      Fig 1: Locating Differential Housing Cover Bolts
      G06269552Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals