LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2640 (Front Suspension) >> Removal And Installation >> Wheel Studs >> Removal

Wheel Studs: Removal

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel hub. For additional information, refer to WHEEL BEARING AND WHEEL HUB  in this service information.
  2. Using a press, remove the wheel stud from the wheel bearing and hub assembly.
Fig 1: Removing Wheel Stud From Wheel Bearing And Hub Assembly Using Press
G07784058Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals