LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2640 (Front Suspension) >> Removal And Installation >> Wheel Studs >> Installation

Wheel Studs: Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the new wheel stud in the wheel hub, aligning the serrations in the wheel hub flange made by the original wheel stud.
  2. Using a press, install a new wheel stud.
    Fig 1: Installing Wheel Stud
    G07784059Courtesy of FORD MOTOR CO.
  3. Install the wheel hub. For additional information, refer to WHEEL BEARING AND WHEEL HUB  in this service information.
scientia non olet · About LEMON Manuals