DTC U2011: Motor: Description

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The PSCM will carry out a self-test of the motor inside the EPAS gear during vehicle start up and monitor the motor during normal driving conditions with voltage at the PSCM between 10 and 17 volts.

DTC U2011:49 (Motor: Internal Electronic Failure) - If motor voltage output falls below or exceeds a predetermined threshold, DTC U2011:49 will be set.
DTC U2011:61 (Motor: Signal Calculation Failure) - If the integrity of the motor torque estimate or motor velocity signal exceeds or does not meet a calculated value, then DTC U2011:61 will be set.