LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2631 (Climate Control System - General Information & Diagnostics (Except Hybrid)) >> Specifications

Section 2631 (Climate Control System - General Information & Diagnostics (Except Hybrid)): Specifications

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL

Item Specification Fill Capacity
Motorcraft® A/C Cooling Coil Coating YN-29 - -
Motorcraft® A/C System Flushing Solvent YN-23 - -
Motorcraft® Electric A/C Compressor Oil YN-32 - Hybrid vehicles only 130 ml (4.4 fl oz)
Motorcraft® PAG Refrigerant Compressor Oil YN-12-D WSH-M1C231-B Non-hybrid vehicles only 177 ml (6 fl oz)
Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada) WSH-M17B19-A 0.62 kg (22 oz) (1.38 lb)
GENERAL SPECIFICATIONS

Item Specification
A/C Compressor (Non-Hybrid) 
Type SP17
A/C Compressor Magnetic Clutch 
Air gap clearance 0.3-0.6 mm (0.012-0.024 in)
A/C Pressure Relief Valve  (1) 
Close pressure 3103 kPa (450 psi)
Open pressure 3,792-4,137 kPa (550-600 psi)
Evaporator Discharge Air Temperature Sensor 
OFF temperature 2°C (36°F)
ON temperature 3°C (37°F)
Refrigerant System Dye 
R-134a Leak Detection Dye 164-R6060 or 164-R6081 -
(1) a Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve, the A/C cycling switch or the pressure cutoff switch location
.