LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2628 (Engine System - General Information) >> General Procedures >> Hydraulic Lash Adjuster Inspection

Hydraulic Lash Adjuster Inspection

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the hydraulic lash adjuster and roller follower for damage. If any damage is found, inspect the camshaft lobes and valves for damage.
    Fig 1: Identifying Hydraulic Lash Adjuster
    G07780508Courtesy of FORD MOTOR CO.