LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2627 (Brake System - General Information) >> General Procedures >> Brake System Inspection >> Brake Booster (Hybrid Vehicles)

Brake Booster (Hybrid Vehicles)

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the brake booster for excessive corrosion or damage. Inspect the vacuum hoses for leaks and kinks.
    • Install a new brake booster if signs of excessive corrosion or damage are found. For additional information, refer to POWER BRAKE ACTUATION -- BRAKE BOOSTER article.
    • Repair or replace vacuum hoses as necessary.
  2. Check all electrical connections by wiggling connectors and flexing the wire harnesses.
    • Repair the connectors, terminals or wire harnesses as necessary.
  3. Retrieve any ABS module DTCs. For additional information, refer to ANTI-LOCK BRAKE SYSTEM (ABS) & STABILITY CONTROL SYSTEM (SCS) article.
scientia non olet · About LEMON Manuals