LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2624 (Driveline System - General Information) >> Diagnosis And Testing >> Driveline System >> Principals of Operation >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical damage.
    VISUAL INSPECTION TABLE

    Mechanical
    • U-joints
    • CV joints
    • Center bearings
    • Driveshaft tubes
    • Mounting brackets
    • Flanges
    • Housing and cover damage
    • Differential bearings
    • Differential gearsets
    • Pinion bearings
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify the symptom and GO to SYMPTOM TABLE - NVH .